![]() Any closed course racer knows the Magnum pump gives them a huge advantage over a rider using a stock pump, and many freestylers are going to this pump to give them "Maximum" hook up for tricks. The Skat-Trak Yamaha Swirl impeller Stand up JetSki/ Basters is a stainless steel radial edge design that hooks up and produces excellent performance in all. The Magnum pump drastically improves bottom end and rough water performance of your ski. If you have modification to the engine and watercraft, please give us a call so that we can recommend you with the correct impeller application. This is recommended for a stock Engine only. Skat-Trak’s Kawasaki impeller is recommended with a 13/18 1100 Swirl pitch in an 148mm pump. It is also often custom-installed on other PWC. Skat Trak Impeller Kawasaki 1100 ZXi 13/18 1100 Swirl. ![]() The pump fits most Yamaha PWC using the 144mm pump from the factory, like a Super jet, Wave Blaster and many more. It does NOT include an impeller housing (aka wear-ring). It comes complete with a C+75 Swirl impeller and tail cone. This pump is brand new (meaning no core is necessary). A set back pump delivers even better hook up and slightly more top speed in rough conditions than a standard position pump. This pump is a "Set Back" about 1.5", so your stock driveshaft won't reach the coupler unless you also purchase an extended driveshaft (Sold Separately). The Skat-Trak Yamaha C+75 12 Vane Set Back 144mm or 148mm Magnum Pump is a stainless steel vane section with a 75mm bearing carrier pressed into an OEM stator housing. Any closed course racer knows the Magnum pump gives them a huge advantage over a rider using a stock pump, and many freestylers are going to this pump to give them "Maximum" hook up for tricks. It also fits the 1992-2002 750 models SX, SXi, SXi Pro, SS, ST, Xi, and XiR. The pump fits the 2003-2011 Kawasaki 800 SXR. 21-12-8 with 8,9, or 10 paddles, depending on your horsepower. They hook up great and stand up to sticks, roots, and rocks found on some trails. It comes complete with a C-75 Swirl impeller, bearings, seals, pump shaft, and tail cone. Skat Trak Extreme haulers are the best for the Oregon Dunes. The pump is brand new (meaning no core is necessary). It is a "Set Back" pump, meaning the internal position of the parts are further back within the housing, requiring either an extended shaft, or an extended length nose impeller to reach the stock driveshaft. The Skat-Trak Kawasaki High Performance C+75 12 Vane Set Back Magnum Pump is a stainless steel (vane and housing), 145mm diameter pump with a 75mm bearing carrier. SKAT pumps come in many configurations but a popular choice for KAWI drive line such as HBC REVENGE/EME Q8/LENZI1ONE hulls.
0 Comments
Leave a Reply. |